[1] Z. Shen et al., "A 181.8 dB FoMs Zoom Capacitance-to-Digital Converter with kT/C Noise Cancellation and Dead Band Operation," CICC, 2024. https://doi.org/10.1109/CICC60959.2024.10529047

[2] E. Sacco et al., "A 96.9-dB-resolution 109-uW second-order robust closed-loop VCO-based sensor interface for multiplexed single-ended resistance readout in 180-nm CMOS," JSSC, 2022. https://doi.org/10.1109/JSSC.2022.3163284

[3] E YJ. Huang et al., "A Self-Powered CMOS Reconfigurable Multi-Sensor SoC for Biomedical Applications," JSSC, 2014. https://doi.org/10.1109/JSSC.2013.2297392

[4] Y. Luo et al., "A 70uW 1.19mm2 Wireless Sensor with 32 Channels of Resistive and Capacitive Sensors and Edge-Encoded PWM UWB Transceiver," ISSCC, 2020. https://doi.org/10.1109/ISSCC19947.2020.9063079

[5] H. Jiang et al., "A 2-in-1 Temperature and Humidity Sensor with a Single FLL Wheatstone-Bridge Front-End," JSSC, 2020. https://doi.org/10.1109/JSSC.2020.2989585

[6] AK. George et al., "A 46-nF/10-MOhm Range 114-aF/0.37-Ohm Resolution Parasitic- and Temperature-Insensitive Reconfigurable RC-to-Digital Converter in 0.18-um CMOS," TCAS-I, 2022. https://doi.org/10.1109/TCSI.2021.3134010

[7] X. Feng et al., "A 72-Channel Resistive-and-Capacitive Sensor Interface Achieving 0.74 uW/ Channel and 0.038 mm2/ Channel by Noise-Orthogonalizing and Pad-Sharing Techniques," CICC, 2023. https://doi.org/10.1109/CICC57935.2023.10121283

[8] S. Oh et al., "A 2.5nJ Duty-Cycled Bridge-to-Digital Converter Integrated in a 13mm3 Pressure-Sensing System," ISSCC, 2018. https://doi.org/10.1109/ISSCC.2018.8310317

[9] H. Jiang et al., "Energy-efficient bridge-to-digital converters," CICC, 2018. https://doi.org/10.1109/CICC.2018.8357027

[10] J. Kim et al., "A 20 uW, 0.05mm2 Duty-Cycled Resistor and Frequency-Locked-Loop-based Wheatstone Bridge Interface for Low Resistance Sensing Systems," CICC, 2021. https://doi.org/10.1109/CICC51472.2021.9431533

[11] S. Yu et al., "A Reconfigurable Tri-Mode Frequency-Locked Loop Readout Circuit for Biosensor Interfaces," TBioCAS, 2023. https://doi.org/10.1109/TBCAS.2023.3288505

[12] S. Xu et al., "An Ultra-Low Power Wearable Sensing System with a Highly Sensitive Three-Dimensional LIG Sensor and Energy-Efficient Time Domain Readout," ISCAS, 2024. https://doi.org/10.1109/ISCAS58744.2024.10558125

[13] D. Seo et al., "An RC Delay-Based Pressure-Sensing System With Energy-Efficient Bit-Level Oversampling Techniques for Implantable IOP Monitoring Systems," JSSC, 2023. https://doi.org/10.1109/JSSC.2023.3286796

[14] Binkley, D.M. et al., "Optimizing Drain Current, Inversion Level, and Channel Length in Analog CMOS Design". Analog Integr Circ Sig Process 47, 137–163 (2006). https://doi.org/10.1007/s10470-006-2949-y

[15] Asad A. Abidi, Robert G. Meyer, "Noise in Relaxation Oscillators",JSSC, 1983, doi: 10.1109/JSSC.1983.1052034

[16] Willy M.C. Sansen, "Analog Design Essentials",2006, Chapter 15,24

[17] Phillip E. Allen, "CMOS Analog Circuit Design",3rd ed, Chapter 6,7,8

[18] P R. Gray et al, "Analysis and Design of Analog Integrated Circuits",5th ed, Chapter 4

[19] P R. Kinget, "Lecture Notes for EE6350 and EE4312"